If you own a Glock pistol, you may have noticed that it has a metal plate embedded in the polymer frame that bears the serial number of the firearm. This plate is required by law to identify the gun and prevent it from being used for illegal purposes. However, some Glock owners may want to remove this plate for various reasons, such as replacing a damaged frame, customizing their gun, or avoiding unwanted attention. In this article, we will explain why and how to remove the serial number plate from your Glock pistol.
Why Remove the Serial Number Plate?
There are several reasons why some Glock owners may want to remove the serial number plate from their frame. Some of them are:
Replacing a damaged frame. If your Glock frame has been cracked, gouged, or otherwise damaged, you may want to replace it with a new one. However, you cannot simply buy a new frame and swap it with your old one, as that would change the serial number of your gun and make it illegal. You have to either send your gun back to Glock for a replacement frame with the same serial number, or remove the serial number plate from your old frame and install it in a new one.
Customizing your gun. If you want to customize your Glock with aftermarket parts, such as a different grip, trigger, slide, or barrel, you may also want to remove the serial number plate from your frame. This way, you can have a unique gun that reflects your personal style and preferences. However, you should be careful not to alter the functionality or safety of your gun, and you should always keep the original parts in case you need to restore your gun to its factory condition.
Avoiding unwanted attention. If you live in a state or country that has strict gun laws or regulations, you may want to remove the serial number plate from your frame to avoid attracting unwanted attention from law enforcement or other authorities. For example, some states require you to register your gun with the state database, which may compromise your privacy and security. By removing the serial number plate, you can make your gun less traceable and more discreet. However, you should be aware of the legal risks and consequences of doing so, and you should always comply with the law when using or transporting your gun.
How to Remove the Serial Number Plate?
Removing the serial number plate from your Glock frame is not an easy task, and it requires some skill and tools. You should also be aware that doing so may void your warranty and affect the resale value of your gun. Here are the steps to remove the serial number plate from your Glock frame:
Unload and disassemble your gun. Before you start working on your gun, make sure it is unloaded and disassembled. Remove the magazine and check the chamber for any rounds. Then field strip your gun by removing the slide assembly, barrel, recoil spring assembly, and firing pin assembly.
Remove the trigger assembly. Next, you need to remove the trigger assembly from your frame. To do this, use a punch tool or a small screwdriver to push out the two pins that hold the trigger assembly in place. Then pull out the trigger assembly from the frame.
Cut out the serial number plate. Now comes the tricky part. You need to cut out the serial number plate from your frame without damaging it or the surrounding polymer. To do this, use a rotary tool or a dremel with a cutting wheel attachment. Carefully cut along the edges of the metal plate until it is loose enough to pry out with a flathead screwdriver or pliers. Be careful not to cut too deep or too wide into the polymer, as that may weaken or deform your frame.
Sand and smooth out the cutout area. After you have removed the serial number plate from your frame, you need to sand and smooth out the cutout area where it was embedded. Use sandpaper or a file to remove any rough edges or burrs from the polymer. Then use a heat gun or a lighter to melt and smooth out any uneven surfaces or gaps in the polymer. Be 04f6b60f66